Pellet press TL700 for biomass

Pellet press TL700 for biomass and machine use

The machine is used for the production of the pellets – the pelleting of the dried-dust, the straw, the hay, the corn and the waste arised from the cereal cleaning, whose physical-mechanical properties allow for their agglutination. In case the machine is planned to be used to process a different raw material, it must be agreed by the manufacturer of the machine.

The company offers the pelleting of the test samples also different from the mentioned in the area of the company. In the past there were successfully tested the samples of the cellulose waste, PVC, the crashed rubber and the crashed car covers.

It is possible to use the moulding gear TL600 or TL700 according the type of the processing raw material.

Machine description

The machine works continuously if there is smooth material feed. The rightly modified raw material is brought into the area of the mould, where by using of the pressing pulleys it is pressed into the holes of the mould and at the bottom of the mould it is cut or broken to the pellets that are transported to the exit and from there to a cooling device.

The length of the pellets depends on the number of cutting blades and on the amount of fed raw material, i.e. the total performance of the machine.
The raw material is supplied from a particular machine equipment that is not part of this machine.

After pressing it is necessary to cool the pellets to the temperature 20°C or more than 5°C higher compare with the ambient temperature. When dispatching them, the pellets must have a temperature of max. 30°C. Pressing the loose raw material through the holes of the mould sometimes results in an unhealthy dusty substance that needs to be exhausted.

Tento web používá k poskytování služeb, personalizaci reklam a analýze návštěvnosti soubory cookies. Tyto informace jsou sdíleny s našimi partnery.